Choosing the Perfect Sealer
Hardwood Floor Sealer is applied to the surface of the wood floor to protect against stains and damage.
PALL-X COLOR Sealer

PALL-X COLOR Sealer will react with most wood species to bring out the warm rich tones of any wood floor. This sealer is recommended to enhance the vibrancy and depth of a stain color over a wood floor.
Note: do not use over white or pastel stains.
PALL-X WHITESEAL Sealer

PALL-X WHITESEAL sealer contains a small amount of white pigment that will produce a arctic or Scandinavian effect on most wood species. Ideal for lighter color wood species.
PALL-X CLEAR Sealer

PALL-X CLEAR sealer is ideal when a clear, light tone look is desired. It is also recommended over white or pastel stains prior to the application of the final finish coats.
PALL-X NATURESEAL Sealer

PALL-X NATURESEAL sealer is a waterborne, 1-component sealer ideal for use on lighter color species or where an untreated wood appearance is desired.


Choosing the Perfect Finish
Hardwood Floor Finish creates lasting beauty and protects wood flooring from wear, dirt and moisture while giving the wood an attractive color and matte.
PALL-X GOLD Finish

PALL-X GOLD is a 2-component clear waterborne hardwood floor finish for commercial or residential use. Low odor and fully cured in 3 days which allows normal use of the wood floor to resume quicker than when choosing traditional oil modified polyurethanes.
Available in three popular sheens: Semi-Gloss, Satin, & Matte.
PALL-X POWER Finish

PALL-X POWER is a 1-component clear waterborne hardwood floor finish for commercial or residential use. Low odor and fully cured in 5 days which allows normal use of the wood floor to resume quicker than when choosing traditional oil modified polyurethanes.
Available in four popular sheens: Gloss, Semi-Gloss, Satin, & Matte.
PALL-X PURE Finish

PALL-X PURE is a 2-component clear waterborne hardwood floor finish for commercial or residential use. Small amounts of white pigment in this finish produce a ultra matte or untreated surface look to a wood floor.
PALL-X 96 NEXGEN Finish

PALL-X 96 NEXGEN is a 1-component clear waterborne hardwood floor finish for light commercial or residential use. Low odor and fully cured in 7 days which allows normal use of the wood floor to resume quicker than when choosing traditional oil modified polyurethanes.
Available in three popular sheens: Semi-Gloss, Satin, & Matte.
Maintenance
GENERAL CLEANING/DUSTING
Using the Pallmann Hardwood Floor Dusting Pad, lightly dust the floor to remove large debris. A vacuum may also be used for large areas. The Pallmann Hardwood Floor Cleaner can be used with the Pallmann Microfiber Pad on a weekly basis or as needed to thoroughly clean your floors. Clean stubborn spots, spills, and shoe marks by spraying the Pallmann Hardwood Floor Cleaner directly on the areas.
INSPECTION
Inspect protector pads on furniture, and ensure that all walk-off mats are in proper locations. Visually inspect the wood floor for traffic patterns that may be present. If a traffic pattern is noticeable, it may be time to consult a wood flooring professional to discuss recoating options.
PROFESSIONAL DEEP CLEANING
Contact a professional hardwood flooring contractor to deep clean your wood floors using the Pallmann Clean Strong product once a year. Over time, accumulation of everyday residues such as oils, grease, and dirt will occur on the hardwood floor. The residues will act as an abrasive which may cause premature finish wear. The Pallmann Clean Strong product is a professional product that should only be used by a professional hardwood flooring contractor.
RECOAT
A new coat of finish may need to be applied to your wood floor several years after the initial application. This will ensure that you do not wear down the current finish to bare wood, causing expensive sanding procedures. Compared to re-sanding, re-coating is an inexpensive procedure that often can be completed in one day, with little to no dust in the home. We recommend using our dustless re-coating procedure PALL-X BOND and top coating with one of our waterborne finishes.