NEXUS–FUSION WOOD FLOOR ADHESIVE

PREMIUM PLUS, STP Wood Floor Adhesive with Moisture Control

Single-component, solvent and water-free Silane-Terminated Polymer wood adhesive for hardwood floors.

Applications

Moisture control up to 95% RH**
Installation of solid 3/4" wood flooring up to 8" wide
No width or length restrictions for engineered flooring
Approved for use over radiant heat systems
Prefinished and unfinished engineered wood flooring
Solid tongue & groove strip and plank
Exotic species
Wood flooring on most subfloors with adequate strength, such as concrete, fortified gypsum, plywood, and OSB

Moisture control up to 95% RH – Prevents floor adhesion failure
Extended working times – Efficient placement of adhesive & wood flooring
Sound reduction properties – Absorbs noise that may travel through floors
Silane technology – Strong mechanical bond with wood floor and strong chemical bond with substrate
Easy clean up – Will not etch finished floor

* At 70 °F and 65 % rel. humidity
Packaging:	3 gal. plastic pail (11.4 L)
Shelf life:	Min. 12 months
Color:	Beige
Coverage:	• MC on subfloors up to 95% RH: 25 – 30 sq.ft./gal or 75 – 90 sq.ft./pail with All-in-One Trowel (1/8” x 1/8” x 1/8” x 1/16”) • When used in conjunction with a PALLMANN MVR, or when MC does not exceed 85% RH: 65 sq.ft./gal or 195 sq.ft./pail with B-11 trowel
Working climate:	Min. 60 – 85 °F (15 – 25 °C) min. 60 °F at floor level. Freeze / thaw stable.
Drying time:	Foot traffic, 8 – 10 hours furniture or sanding, 24 hours
Working time:	Up to 1 hour^*
Ready for sanding:	After approx. 24 hours^*
Load-bearing:	After approx. 8 hours^*
Final strength:	After 5 – 7 days^*
VOC	< 10g/L
Water vapor permeability	According ASTM E 96, < 3 Perms